One of the main advantages is its gasoline lawnmower frugality and simplicity of operation.
The engine burns a small amount is not much of a gas mixture, and the lack of cord, like electric lawn mowers, allows you to extend the limits of its use.
But despite all its advantages, benzokosilka, as well as other equipment, subject to breakdowns.
The main reasons for failure gasoline lawn mower
There are many reasons why gasolinelawn mower will not start. Among them are: empty battery, the engine belt deformation, soot cake candle ignition malfunction in the fuel and control gear, wear piston engine component.
A detailed examination of the reasons for each
discharged battery - the most harmlesscause. To eliminate it put the battery recharged for several hours. If trimmers are not equipped with batteries, so it works directly from the generator, which is directly connected to the switch. It is also called CAT. It is he who gives the first spark at the start of rotation of the generator armature. Inspect KET, usually located on the inner side facing the spit. All electrical chips to be connected to it. If they jumped out, put them back into the slots, and the mower will certainly start.
Engine belt deformation occurs dueincreased engine speed. In other words, you mow at full power. Strap - consumables, which can not be restored, it will have to buy in the store. It is located to the left or rear of the engine under cover. In some models it is mounted on the outside of the front side of the engine.
When purchasing a belt note the thickness of the cover and its diameter.
Soot is deposited due to non-compliance with the proportionsmixing fuel and two-stroke oil. Use gasoline with an octane number above eighty. Remove soot from the candles will burn it. To do this, remove the spark plug from the cylinder and bring it to the fire so that the flames scorched candle base. After that, clean it with fine sandpaper and screw back.
Do not tighten the spark plug too tightly, there is a chance the thread deformation.
Typically, petrol lawn mower is equipped withcarbureted engine type. carburettor fault mainly occurs due to clogging of a jet. To clean it, you can use two ways:
1. Take an ordinary car pump, insert the pump nozzle and the valve in the purge.
2. Remove the carburetor from the engine, completely disassemble it and wash solution in the gasoline.
By the piston component includes: a cylinder, piston, piston pin and piston rings. These parts, like the engine belt, can not be reversed. They have to buy in the store.