CeskyFrenchGermanItalianPortugueseTurkceSpanish

The relationship between the daughter and mother
09/18/2016
How to organize a separate holiday
09/18/2016

How do I get the washing machine did not jump

Many different washing machines

With the invention of the washing machine people had more free time.

Only occasionally this device becomes a real problem when it creates unnecessary vibration.

And then all the free time spent on the solution of this situation.


When the washing machine "jumping" duringwork, it is not necessarily something went wrong and do not need to urgently call a service center. This occurs typically at high speed in the "Spin" mode and is associated with certain factors.

How to get rid of "hops"

The centrifugal force generated by thewashing machine at high speed, causes the device to experience severe stress. This results in severe vibration capable of eventually even lead to permanent damage. However, there are ways to avoid this

Practice shows that nine out of ten reasons "jumping" of the washing machine can be solved without a service center.

Incorrect installation. If the device itself is not installed properly, the centrifugal force is literally "throws" the car from side to side. There is a strong oscillation and vibration, which can be eliminated if we use level, and by changing the height of the machine feet to put it vertically and horizontally. Normally, the device has a nut and a lock nut, which can be adjusted. To find out which leg to twist, put a saucer on the unit with water and look at the slope of the liquid.
In some cases, "bouncing" too strong andno matter how you align, nothing happens. In this case, vibrations can be reduced by using a rubber mat or separate circles cut from this material. The main thing is that your washing machine is not standing on the bare tile or concrete. This will greatly pay off fluctuations.
It also happens that the machine "jumping" becauseDrum unit is not fully loaded. Taking into account all of the same centrifugal force torque at partial load makes the machine bounce. Thicker padding eliminate this phenomenon to a large extent, or simply bring to nothing.
suspension fault. This reason can also be, when all previous methods have already been taken into account and failed to eliminate vibrations. It so happens that over time wear shock, something happens to the counterweight or in the drum defect occurs during operation. It appears so, that yesterday the car did not jump, and jumping today. In this case, it is time to call a service center.

Modern washing machines

In modern models of washing machines are usually not such a strong vibration in a particular installation. If this effect occurs, follow the advice given above, or go to a service center.

Old washing machines, for years served faithfully, can still work with proper treatment.

If your washing machine has already lived his and has more than a dozen years, not necessarily to change it. If you make a small adjustment of the position of the device on the floor, you can use it on.

Comments are closed.