Sew a simple apron, to effectively protect clothing while cooking or washing dishes, very simple.
Sew a single cut apron and decorate it onown taste - applique, embroidery, ruffles, pockets in unusual shapes, etc. This apron protects clothes better than I previously described a simple apron.
We start work on the apron with fabric choice. Perfect natural cotton (cotton, satin, both produced in the Soviet period). If you find a house bought and forgotten cuts of a similar fabric - fine, because then it was a product of very good quality. You can also use denim, linen.
If you've never sewn apron, pre-build a pattern on paperAnd then pin it to the fabric and cut out parts of the apron (experienced craftswomen it is enough just to paint the desired silhouette on cloth). Do not forget the seam allowance (0.5-1 cm).
Pre-measure desired by their figuresize products (AB - width of the top of the apron BV - the height of the top, UH - the length of the bottom). The approximate dimensions of the apron for the women are given in the diagram, but you can adjust them as you wish.
Build the main part of the pattern. It is a hexagon, the top two sides of which are concave (they can build and direct, but still be comfortable in this apron as in the photo). Also kroim two narrow rectangle (strings) and a smaller rectangle (straps around the neck). A pocket or two pockets kroite their own taste and desire - big or small. You can not do them at all, because not all of them are.
The procedure for sewing an apron as follows: sheathe apron bias binding of the same fabric or a suitable color (the width of the inlay may be about one and a half centimeters). Sew straps and ties. Last detail - the pockets. Apron ready.
Helpful advice: convenient straps to sew two pieces, so you can tie it on the neck. In this case, an apron suitable for any member of the family - from the smallest to the tallest.