How to entertain at birthday party
How to remove the banner from the Internet

How to sew a tablecloth wedding

How to sew a tablecloth wedding

Decorated wedding table plays a major role tablecloth.

It brings to the general festive atmospherespecial solemnity. Typically, the newlyweds and their guests used a long white table cloth cover of thick, crisp and well made in the same style with napkins and other interior design items.

However, you can back off a little from the usual "wedding etiquette" and to make new and interesting touches to the decor festive feast.

You will need

  • - Otrez flax or cotton
  • - molton-
  • - Fabric companion dorozhki- Dining
  • - santimetr-
  • - nitki-
  • - bulavki-
  • - karandash-
  • - nozhnitsy-
  • - igla-
  • - utyug-
  • - sewing machine-
  • - Decorative shnur-
  • - Designer ribbon and flowers (optional).



Buy a sufficient amount of fabric for sewingwedding tablecloths. It is necessary to know the exact size of the table and provide a great seam allowance that will fall nicely. Some etiquette experts believe that by sitting tablecloth should reach the seats of chairs. However, you can withdraw from these rules and make the folds of "table linen" is more lush and long.


It is recommended to make the wedding of two tableclothparts - a small backing cover (exactly along the length and width of the table top), and the upper, decorative cloth. This will move with less noise on the table instruments and oberech polished surface wear. The lower part of the tablecloth is called "molleton" - is soft and thick cotton fabric. For the main parts of a cut is recommended to choose otrez linen or cotton dense matter.


Carve out both sides of the festive tablecloths andleave allowances for the cut line on the hem of 4 to 5 cm - heavy seams better fix a molleton or cloth upper, not allowing them to slide on the table.


Iron the hem, and then baste it manually. You can then process the edge seams on sewing machine and carefully remove the basting.


If it is assumed that at the wedding tablepeople will sit only on one side (for example, the newlyweds and their parents), the outer, free, side can be issued strong folds to the floor. Make allowance for the assembly according to their desired density. For this purpose, the total length and width of the table top should be multiplied by 1.5-3 times.


Prepare for frills and strip weighing her bottomdecorative cord suitable tone - it will delay the wrinkles and give a new holiday decoration color accent. Divide the edge of the main tablecloths and simultaneously future frill into equal parts, marking them with a pencil on the reverse or pins.


Form a crease, pinning them with pins orprimetyvaya. Make sure that the frills are smoothly and accurately, then it is possible to build a connecting line on the sewing machine and zigzag stitch to close up.


The final touch will be the decorations tablecloths. You can additionally perform the so-called canteen track - a strip of tissue that lies over the base coat. Select it in the same color with decorative cord on frills. Finally, the free side lay the table can be decorated with designer ribbon and flowers.

Comments are closed.