CeskyFrenchGermanItalianPortugueseTurkceSpanish

Is it true that a cat treat people
05/11/2016
How to make cocktails from Bacardi
05/11/2016

How to sew a shirt female

How to sew a shirt female

Beautiful and comfortable nightgown - an essential attribute in the wardrobe of every self-respecting woman.

The modern apparel market can not always offer something truly original and at the same time affordable.

Underline their individuality, sew their own nightgown!

You will need

  • - material-
  • - santimetr-
  • - vykroyka-
  • - nozhnitsy-
  • - nitki-
  • - igolka-
  • - sewing machine.

instructions

1

To begin, select the material of which will besewed nightgown. The best option in this case is cotton fabric, soft and not very tight. To create a shirt buy 1.5 meters of material and thread to match.

2

To fully consistent with the future shirtyour size, make a pattern. To do this, find the dense polyethylene or paper (should be fine the rest of the last repair wallpaper). Pick up a pen or marker of any color and draw a portion of the chest, two rectangular strips. The length of each of these bands should be equal to putting your breast (plus nadbavte 2-3 cm at the seams). In order to calculate the putting, take a centimeter and measure the circumference of your chest. The data, for example, 85 cm, divide in half. We obtain 42.5 cm. This value will be putting his chest.

3

The height of the bars should be approximately 12.5 cm. Cut out the pattern. Gently apply it to the fabric and trace the contour of the soft graphite pencil or chalk so that after washing on the product no traces remain. Fold each piece along the lines of the front part of the inside of the fabric. "Loosely" every detail along the edges, remove the "obvious" and see whether the future product, the pattern, if the seams in place and, if all goes well, a crosslinking pieces of fabric together capital seam.

4

Take new length of paper / polyethylene andDraw a large rectangle on it. Its width should be about 1.5 times the width of the chest, and a height of 75 cm (you can increase or decrease it on your own, which would require to measure the distance from the chest to the hem of her nightgown and record measurements at the level where hem will have come to an end).

5

Circle the contours of the pattern on the material. Slightly prisoberite upper edge of this segment into two seam (one - larger stitches, the other - smaller). Holding on both edges of the thread, bring the width of the central part of the nightgown to the width of the chest, and then connect the seams of her chest and the central part.

6

If you sew a shirt on the straps, youIt needs to cut a rectangular strip of fabric width of 3.2 cm and about 45 cm - in length. Fold the resulting elongated length of the face inward and sostrochite. Then "Loosely" straps and try on a shirt. Try to find the optimal length for the straps, and then cut off the extra inches and sew the ribbon to the shirt "fair copy".

Comments are closed.