When connecting crocheted parts necessary to perform special flexible joints, so that the seam does not torn by pulling.
Sutures are different depending on the direction of drawing in detail grind.
Before stitching knitted otparte parts, dry them and place on a flat surface face up. To connect components using the same thread as in knitwear.
To perform the horizontal joints (for example,stitching detail on the shoulder line) seize needle alternately one loop on every detail. Capture with no edge loops, and those who are directly after them. Tighten the thread about every 2 cm, but do not tighten slino, tchoby seam remains elastic. Loop seize completely, ie both parts (two strings).
The horizontal seam is also performed, if youleft shoulder loops on auxiliary needles. Such a seam will be less noticeable and more accurate. Grab a needle two loops with one piece, pull the thread, grab the two loops on the other parts, in this case remove the captured loops with needles. Regularly tighten thread, her fingers stroking the resulting seam.
Vertical joints are performed, for example,stitching back sides and shelves. Grab a needle broach between the edge and the accompanying loop, pull the string and repeat the same thing on the other part. Tighten the thread every two centimeters.
When you stitch the sleeves you will have to connectDetails with a different knitting pattern: one part will lie horizontally, the other - vertically. Align the center of the expanded portion of the sleeve to the shoulder seam, place it temporarily Cleave pin. On the sleeve grab after the next edge loop, and on the back of the shelf and - broach between the edge and the next loop. Regularly tighten the thread and follow that there is no bias. If you see that a sleeve loops begin to shift relative to broach the basic details, skip one loop.
Connect knitted items can and a sewing machine, but be sure to use Overlock stitch or knitting to save seam elasticity.