The provider of "Rainbow TV" offers in its packagesPaid satellite digital television channels for viewing by the whole family. In addition to broadcasting third-party programs, "Rainbow TV" also offers a product of its own production under the brand name "Club 100", such as "Illusion +", "Russian Illusion", "Zoo", "Eurokino" and "Children's".
The coverage area of the satellite covers the entire territory of the Russian Federation and the CIS countries.
To view the channels, you must install and configure the antenna for reception.
You will need
- - Linear Ku-band converter-
- - satellite tuner with CI-slot or with the possibility of receiving Irdeto 2 encoding.
Install the satellite dish in a place where there are no obstacles in front of it - a wall of a high-rise building or tall trees. To receive the signal from the provider "Rainbow TV "will need a plate with a diameter of at least 90 cm,A satellite receiver (tuner) that can receive a signal in Irdeto 2 coding, or a CI slot for installing a digital access card, and a Ku-band line converter.
Determine whether your location is in the coverage area of the provider "Rainbow TV "and which antenna diameter to receive the signal is required. Turn the antenna towards the satellite ABS 1 75e, 75 degrees east. To do this, use the site www.dishpointer.com, Where enter in the search string the name of your city or its geographical coordinates.
Then select a location on the satellite mapLocation of your house and click on it. Under the search bar is a drop-down menu with the name of the satellites. Select ABS 1. The green beam will show the direction, and the bottom will indicate the satellite's azimuth, the antenna's angle of position (the tilt of its mirror), and the degree of turn of the converter.
Connect the coaxial cable through the F-connectors converter to the receiver, and it to the TV. Turn on the tuner, adjust the channel of the receiver on the TV. TV provider "Rainbow TV "broadcasts from transponders: 12548v22000 and 12610v22000, where the first digit is the frequency, v is the vertical polarization, the second is the flow rate.
Enter this data into the receiver using the remote control. Start slowly turning the antenna left and right until a steady signal appears, while the value of the signal quality and power will change in the channel setting window on the TV. Fix it, turn the converter to a stronger value and secure it. For more precise adjustment, you can use special instruments.