Remote starting of the car engine from the alarm panel is an indispensable option in the winter. It allows you to warm up the engine until you need temperature and sit down in the already warm interior.
In severe frosts (below 20 ° C) with a weak battery, it is impossible to start the machine remotely.
You can program an hourly timer that will start the car after a certain time on its own.
This will allow to maintain the necessary engine temperature all night, so that in the morning it can start without problems.
You will need
- Side cutters
- Insulating tape
- Tester or continuity test
The main automatic start wires are connected to the ignition switch - the stringer wire (12V), ignition 1, ignition 2, ACC wire (12V appears in the first position of the key).
If the car is equipped with a regular immobilizer,Then the alarm module needs to be purchased by the immobilizer module ("crawler"). One of the ignition keys is put into the module. During the remote start of the engine, information is read from this key and transmitted to the ignition switch.
To the signaling with the auto start, it is necessary to connect the engine start control wire. It is connected to the oil sensor, generator or tachometer.
Program the alarm unit according to the instruction of this model. The main positions for programming: the choice of engine start control, engine running time, automatic transmission or manual transmission.
From the unit, connect the wire going to the brake or "handbrake". It is needed for an emergency car jamming or resetting information on starting the engine.