Who was Saint Mauritius
How to speed up hair growth

How to remove the paint from the glass

How to remove the paint from the glass

Repair - it is a long and laborious.

No matter how careful, one day and a little bloodimplement it unlikely to succeed. Here the paint, for example, tends to adhere not only to the surfaces you want to paint, but also to the fact that you did not plan to paint and.

And if a metal or plastic paint still somehow can be rubbed away, what to do with the smudges on the glass, it is unclear.

How to properly remove the paint from the glass?

You will need

  • The solvent, a blade or a sharp knife, iron or hair dryer building, foil



Use a razor blade or a sharp knife

The most simple and ancient way of removing olddrops and stains on the glass. Suitable for very old dried paints, as well as for fresh. Gently scrape the paint sharp blade. Only use a very sharp knife or razor, as blunt surface will leave more than scratches and stains, significantly increasing the time you work. Before you start to scrape off the old paint in such a way, moisten with hot water glass. This will prevent unnecessary scratches and significantly speed up the whole process.


Buy the hardware store in a special tool

industry now produces hugevariety of solvents for paint that can not only remove it from any surface, but also to do it quite safely and quickly. Check with the seller, you need to remove the ink droplets is from the glass, and he will select for you the solvent, which will solve the problem once and for all. In any case, carefully read the instructions on the label. Even the most modern tool if used incorrectly can turn your clear glass in muddy and untidy.


Use foil and iron

There is another method of removing paint from the glass. Heat it with a special building dryer or a conventional home iron. The high temperature paint begins to soften, and it will be quite easy to remove. Attach the glass ordinary foil, and on top of her hot iron and hold for a while as long as the paint is well warms up. We perform such manipulation is possible only with large thick streaks and droplets. If the glass is only slightly smeared with a thin layer, heat is not help, use a conventional solvent better.

Comments are closed.