CeskyFrenchGermanItalianPortugueseTurkceSpanish

How to beat the game Mystery Island
08/17/2016
How to take care of your hair?
08/17/2016

How to make a wooden ladder with your hands

How to make a wooden ladder with your hands

People who have a garden or country houses, often carved many things with his hands. And there comes a time when there is a need to do something worthwhile and necessary.

For example, you had the idea of ​​making the attic loft.

Then we'll build a staircase independently.

This is a difficult task that requires careful preparation.

instructions

1

Develop a ladder diagram, follow her workdrawing. All this can be done using the traditional drawing tools, and with the help of computer programs. Calculate the characteristics, the optimal number of steps and the distance between them.

2

Cut out of step boards, the number of whichpre-select, and two string, which will be attached boards. Do not forget to leave an oblique cut on top of the string for a tight connection ladder with the highest surface. The second string, you may not be needed if the gap of the stairs there.

3

Cut the support bars. Their number should be exactly twice the number of stages. Note that their length should be slightly smaller than the length of the string. When connecting the boards with a bowstring see that they were held at regular intervals, consider the height of the steps.

How to make wooden & lt-b & gt-ladder & lt- / b & gt- its & lt-strong & gt-hands & lt- / strong & gt-

4

Try the string where the will is itselfstairs design. Dig two holes having a depth of about 20 cm. Fix the string to the highest level ground, making sure that the distance between them was equal to the width of the stairs.

5

Prepare a concrete mix, and pour them lowerend bowstrings that pre-set in the pit. Now wait about 12 hours before the concrete hardens. Fasten screws stages that are on the uneven bars, and a ladder ready.

How to make wooden & lt-b & gt-ladder & lt- / b & gt- its & lt-strong & gt-hands & lt- / strong & gt-

Comments are closed.