How to replace rear shock
How to buy cheap used / have a car

HOW TO make a frame-stand for jewelry

How to make a box for jewelry-stand

You will agree that under every outfit need to choose a suitable decoration.

The more orders, so, consequently, and more all kinds of pendants, and other jewelry kulonchiki. When a lot of things, they are often lost and forgotten.

Therefore, make your jewelry have always been on the mind, it is necessary for them to do special frame-stand.

You will need

  • - Wooden ramka-
  • - the cloth-
  • - White acrylic kraska-
  • - Gold Acrylic kraska-
  • - One-component lactate krakelyurny
  • - Hooks or wooden Do it by yourself-
  • - sintepon-
  • - Flat kist-
  • - screwdriver-
  • - samorezy-
  • - Adhesive pistolet-
  • - A sponge.



First you need to be primed with a wooden frameusing white acrylic paint. Once the first coat of paint is dry, take a simple kitchen sponge and put her gold paint. The next layer will krakelyurny varnish to be applied to the frame of a flat brush so that it is always moving in the same direction. Varnish should dry for at least 2 hours.


The varnish has dried. Now you are ready for further decoration of the wooden frame. Put it another layer of white acrylic paint. Thus, you need to form a crack-cracelures. It is through them to get the effect of aging wooden surface.


Under the sub-frame size you need to carve out a pieceof syntepon. Just under it should be cut from the fabric flap with margins of 10 centimeters, and on each side. On the stretcher lay sintepon, cover it with a cloth, and then fix it with the glue gun. If this is not available, suitable furniture stapler. That will have a kind of small pads.


Next you need to make a handle for decorations. To do this, perform the screws holes in the pad obtained in those places, which, in your opinion, are suitable for this. It is necessary to tighten the handle. Frame Stand for decorations ready!

Comments are closed.