In your drawers are a mess all the time?
Then you need a separator that will eliminate this problem.
Now we learn how to do it.
You will need
- - A flat casing 220h9h1 cm
- - Acrylic paint belaya-
- - ugolnik-
- - Electric lobzik-
- - stameska-
- - sandpaper-
- - kistochka-
- - Pencil.
The first thing to do - is raschertitcasing, as shown in the diagram, then sawed. Thus, you will have 4 first particles - 52,5 cm, second and third - 49.5 cm and a fourth -. 25.5 cm then treat the edges with sandpaper Spila. Where will intersect separated part after the separator assembly, to do the layout. From the resulting layout should retreat to the right and left 0.5 cm. That will have a cutting width of the future, that is 1 centimeter. But this is not propyl entire height casing, but only to one half, so the center mark on it.
With the help of an electric jigsaw propylene details on the markup. Try to do everything very carefully and precisely.
Sawed jigsaw parts should be removed with a chisel. Edges Spila be treated with sandpaper, so that there were no irregularities and roughness.
After all items casing readyyou need to collect them from the separator frame. So you check that everything is done carefully and all the parts fit together. If all is well, that the frame should be disassembled and color paint. Once the paint is dry, reassemble the product. Separator for the box is ready! Now nothing will be able to create a mess.