Many will wonder why two parrots of different sexes, living in a single cell, do not breed? The answer is simple - they need to nest.
That it is a signal for reproduction. You can of course buy it at the pet store, but it can be done yourself.
Now we find out how.
You will need
- - Board width of 16 cm
- - Board 20 cm wide
- - Screws - 20 piece-
- - 2-3 cropping doski-
- - nozhovka-
- - drel-
- - lobzik-
- - a hammer.
First you need to draw on all boardsthe necessary elements for the construction of the nest for budgerigars. On the one 20 centimeters, draw a bottom cover, front and rear walls. On the second board - fastening strap, side walls and a sleeve for cover. The most suitable height on all sides nests - 30 centimeters.
Then you need to cut it out all drawn by parts with a hacksaw. The point is, of course, laborious, but useful.
Now you need to cut a hole in the front wall of the future nest. It will be notches. Note that it should be done at 5 inches from the top edge of the board.
It remains only with the help of a drill to drill holes for the screws in one centimeter from the edge of the elements, and their diameter must not exceed 4 mm.
We are putting all the details. Jack budgies ready! As you can see, it is fairly easy to do. By the way, it's a good idea to earnings - they are buying eggs pet stores.