CeskyFrenchGermanItalianPortugueseTurkceSpanish

The interpretation of dreams in psychoanalysis
05/03/2016
How to choose a driver to your laptop
05/03/2016

How to make a lamp with his hands

The lamp of the straws for a cocktail

For the manufacture of the original luminaire theirhands fit the most common items: plastic bottles and disposable tableware, thread and twine, felt, crocheted napkins, even a teapot and used coffee filters.

You will need

  • For lamp-cones:
  • - PET bottle 5 n-
  • - Disposable lozhki-
  • - Super glue-
  • - Knife.
  • For light from the paper:
  • - Paper lamp-hinge
  • - Cigarette bumaga-
  • - nozhnitsy-
  • - double sided tape.
  • For coffee lamp:
  • - Lampshade light ottenka-
  • - PVA glue-
  • - Used coffee filters.
  • For lamp-pot:
  • - kettle-
  • - Drill.

instructions

1

Lamp-a lump of plastic spoons
Cut the bottom of a plastic bottle, unscrewcover. This is the basis for the light. Cut the handle from plastic spoons. Apply on top of the spoon a drop of super glue and glue to the bottom of the bottle. Detail of press and hold a few seconds. The next spoon stick as close as possible to the first. Glue the remaining parts in the series. Spoons next row stick with offset and overlap the previous series. Try to do so that the plastic bottle was not visible. Similarly, all the glue on the basis of a spoon. Insert the lamp socket and twist energy-saving light bulb. It is not heated, so a lampshade is melted.

Lamp-a lump of plastic spoons

2

Lamp made of paper
As a basis for this original chandeliersyou need a simple paper lamp sold in IKEA stores. From tissue paper cut into circles of the same diameter. Obkleyte of paper lamp. Attach tissue paper details a piece of double-sided tape and stick to the lamp, and the first row do below, and attach the following lap.

3

light Coffee
This elegant light - a real godsend forcoffee lovers. American designer invented it Lampada, but it is quite possible to do it with their own hands. For its production need coffee filters, which must be pre-washed and dried. Prepared filters stick on a lampshade using PVA glue and allow the lamp to dry. Now you can insert the cartridge, screw energy-saving light bulb and enjoy a pleasant soft light and light aroma drink.

4

Lamp-maker
The original idea for the light madewith their hands, you can borrow from the Italian designer Tommaso Guerra, which created a nice lamp from an ordinary kettle. Take the teapot (the easiest way to work with plastic) and make a hole in the bottom of the required value, so that it can be inserted into the cartridge. To do this, use a drill with a special nozzle. If necessary, during operation moisten it with water. Insert the cartridge and twist energy-saving light bulb.

Comments are closed.