CeskyFrenchGermanItalianPortugueseTurkceSpanish

How to choose a laundry soap
05/02/2016
How to obtain guardianship permission to sell the apartment
05/02/2016

HOW insulate the house from the outside

From the facade insulation depends comfort at home

Conductive properties of the materials making up the wall of the house, the quality of their connections directly affect the heat in a wooden house.

What measures must be carried to the inhabitants of the house do not freeze in the winter?

instructions

1

Firstly, you must find out in which areashome leaking heat. Inspect the walls, the corners of the house, door and window openings on the availability of which is blowing, or that often become wet or misted. If you find a hole, then plug them in using hemp or foam. Very often, the crowns of which are composed of wooden houses eventually crack. Between them there are also gaps, they also need to re-caulk.

2

Window frames should be replaced with plasticFiberglass. When you install plastic windows opening completely isolated by the same foam. If you put plastic windows you can not, fix old ones. Sami glass set on a silicone sealant.

3

Next stage ? This warming of the outside layer of insulating material at home. Modern insulating materials allow a relatively thin layer to create a reliable protection at home from the blowing and cooling. For example, desyatisantimetrovyh layer glass will replace the thermal insulation 160 cm brickwork. But whatever the properties of materials important to put them right.

4

The choice of material for thermal insulation of the facade depends onhow much you are willing to spend on it and how you will mount. For example, polystyrene is good to all: and his thermal conductivity less than that of glass or mineral wool, it can be used in places of high load: basements, floors, foundations. However, a clear lack of foam is its flammability and the release of harmful ethylene person. The advantage of mineral materials? This chemical resistance, fire resistance, sound insulation and hygroscopic capacity.

5

If you choose a heater, then it's timetalk about the insulation design. First the frame consisting of vertical uprights set every 60 cm wall of the house or on a heater width. Rack bar made of 50 * 50 mm. The bars are fixed to the wall with screws or nails. Then the frame is attached plastic insulation anchors, so-called? Fungi ?. For every square meter of insulation? 4-6? Fungi ?.

6

Above the insulation layer is installedwindproof film (superdiffuzionnaya membrane), which further protects the house from blowing and rain penetration. The feature film is that the moisture inside the wall does not leak, but out of it, on the contrary perfectly displayed. On a layer of insulation film is placed overlapping.

7

Thermal insulation of houses can be considered complete. For home decorating, you need to make an ordinary plaster works using wire mesh and apply a topcoat, or install vinyl siding.

Comments are closed.