Insulation of the house of foam - this is one of the most pressing issues faced by many homeowners.
Insulation of the house allows you to save money that would be required for heating in the cold season.
You will need
- - Drill with a drill corresponding diametra-
- - perforator-
- - putty knife-
- - Nozzle "Mixer" -
- - Construction nozhnitsy-
- - vedro-
- - Container kleya-
- - uroven-
- - Klein
- - Plate penoplasta-
- - ruletka-
- - steklosetka-
- - Perforated ugolok-
- - mineral wool-
- - Wooden reechki-
- - a hammer-
- - gvozdi-
- - Vapor sealing and insulating materials.
As well as on the perimeter of the expanded polystyrene plate,its mid-Apply glue. Hold the sheet of foam to the wall of the building. Hold the sheet for half a minute: this will allow the glue to "grab". Foam polystyrene glue the sheets so that the connecting seams are not arranged in a row between them, that is, mount them with ligation - this will prevent cracking of the joints.
Sticked sheets of foam wall mountingusing dowels with liners (they are called "umbrellas"). Secure the middle of a sheet of one or two "umbrellas", and the remaining fasteners located at the corners of the polystyrene sheet and at the junction between the plates.
Enclosure, apply all the "hats" dowels with glue. At the lower and upper polystyrene plates miss fiberglass: it would greatly facilitate the implementation of plastering. Then poshtukaturte wall, let it dry, and then paint the facade or apply a decorative plaster.
House is insulated with mineral wool foam concrete, cover the outer wall insulation, which is secure by nailing to the wall of wooden reechek.
Insulate the ceiling on the outside: lay a vapor barrier material, then a layer of thermal insulation material, and the top throw another layer of vapor barrier.