CeskyFrenchGermanItalianPortugueseTurkceSpanish

HIBISCUS in your home: the cultivation and care
09/06/2016
What benefits are labor veterans
09/06/2016

HOW to make napkin from newspaper tubes

How to make a napkin from newspaper tubes

The original and elegant stand for napkins will be an excellent complement the festive table.

You will need

  • - gazety-
  • - satin ribbon-
  • - acrylic paints-
  • - kistochki-
  • - provoloka-
  • - busina-
  • - scissors
  • - PVA glue-

instructions

1

Cut sheets of newspaper into strips the width of 10-15 cm. Twist the bands, starting from the corner, in the tube, fixing adhesive free area.

2

To fabricate the bottom parts toughertube (from a newspaper page). The number of tubes depends on the size of the napkin. In this case, you need 2 pieces of rigid tubes and about 5 units - ordinary.

3

Make the bottom of the napkin: Cut the tube length of 15 cm in the amount of 4 pieces. Glue them together with white glue and leave to dry completely. Wrap the wire all the detail to better stick together tubes.

4

When the glue dries, remove the wire and make the side panels. Cut tube by 14 cm in size to the basic parts that form an angle.

5

Glue them on top of each other in the tube 2,securing the wire and glue on both sides to the bottom part. First, on the one hand, and when it dries, then the same with the other hand. Note that these parts are glued on each side in the opposite direction.

6

Divide the bottom portion 4 of the segment received 3 marks - places of fastening the other side ducts. Also note marks on one side of the main parts.

7

Cut the desired size to 3 tubes foreach side, considering that all the tubes have to be parallel to each other, then they will be of different sizes. Glue all the details first with one hand, then the other and allow to dry completely.

8

Zadekoriruyte napkin: color silver acrylic paint. Prepare a satin ribbon and one of the stand do bow and sew it in the middle of the bead. Secure in the top right corner of napkin glue-gun (PVA glue) bow, and the free end of the tape obveyte body panel side part and secure it with glue on the underside of the bottom.

Comments are closed.