Pen Spinning? Quite a new modern hobby, which, despite its novelty, is gaining more and more fans around the world.
To do PenSpinning and perform various tricks, you need to make a special pen.
Our step-by-step instruction will help you in making the original penspinning pen.
Take two identical gel pens. Remove the caps from them and cut off the rear ends so that the length of each handle is 9 cm. File the filigree of the sawed edges with a file or file and sand with sandpaper.
Now you need a connecting element,Fastening two handles into one. To do this, take a sturdy pencil and saw off a short piece of 3 cm, or use a metal bolt 3 cm long with a sawn and ground hat.
The connecting element must be of such thickness that it fits snugly into the hole of the sawed end of each handle.
Insert the pencil or bolt into the hole on one side to the middle, and on the other hand, put on the second handle. Sawed edges should meet in the center.
Take a narrow insulating tape and tightly, overlap the center of the resulting handle, overlapping completely the connecting element.
At this point, your pen can already be used for spinning, but you can bring the matter to the end, making it so that the handle can be used and for the purpose.
Find two identical gel bars,Suitable for your handles, cut off them unnecessary with a clerical knife so that along the length of the rods come up for a new size of your handles, insert the rods and twist the metal tips.
Wear both caps over the cap, first taking off the clothespins and sanding the fracture sites.
Now you can both write the resulting two-sided pen, and perform pen spinning tricks with it.