Home / Hobby / Hand-made / How to make decoupage on a plate

How to make decoupage on a plate

/
188 Views

How to make decoupage on a plate</a>

In order to make decoupage on a plate, it is not necessary to have an art education. The main thing is to have the desire and necessary knowledge about the methods of work in the technique of decoupage.

For a beginner needlewoman, it will not be difficult to make a decoupage on a flat surface. With a plate you have to work a little longer.

But the result will give you a lot of pleasure and pride in your creation.

You will need

  • - flat plate of white color
  • - white acrylic primer
  • - acrylic paints
  • - brushes soft
  • - acrylic lacquer
  • - sponge
  • - water
  • - PVA glue

Instructions

1

In order to make decoupage on a plate, weTake a flat plate of white or any other color. Degrease it with alcohol or dishwashing liquid. Wipe the plate dry. Sponge apply the acrylic primer with stamping movements.

2

Primer on a plate with a pattern or other color forWork in the technique of decoupage must be applied several times to completely hide the original surface. Each new layer is applied after the complete drying of the previous layer. We apply from above several layers of acrylic lacquer, so that the soil is not deformed when applying decoupage on a plate.

3

A napkin for decoupage is divided into three layers. Leave the topmost layer. We cut off the drawing carefully on the edge, so that there would be no sharp boundaries. We spread the PVA glue with water in the ratio 1/1 and pour a little on the plate. We put in the center a prepared napkin for decoupage and brush the wrinkles, helping with hands. Cotton napkin remove excess water.

Plate in the technique of decoupage

4

Then, after the napkin has dried, we cover the plate with several layers of acrylic lacquer.

5

Now we make acrylic paintsMissing fragments and select the picture. If necessary, apply a contour. They are good at decoupage different inscriptions. We cover with layers of acrylic lacquer. You can use a matte or glossy varnish.

6

In the end, we glue the fastener to the plate andWe hang on stenochku. And you can give, if you do not mind. Although, give, still make decoupage on a plate. It's so exciting to feel like an artist.

How to make decoupage on a plate Was last modified: May 23rd, 2017 By Zyyxoann
It is main inner container footer text