Home / Rest and Holidays / Other / The house of what material is the most reliable and warm

The house of what material is the most reliable and warm


Among houses of building stones (bricks andDifferent blocks), the warmest is the arbolite. Buildings from sandwich panels in terms of heat savings are identical to carcasses. The thermal insulation characteristics of wooden houses largely depend on the quality of the lumber used in the construction of housing.

Arbolite houses have a high level of heat savings
Choosing a warm, reliable house, you need to pay attention to the following types of materials, of which erect private buildings: timber, building stone, sandwich panels.

Which house is warmer?

Houses made of timber are the most environmentally friendly and costMuch cheaper than brick. In addition, wood has a lower thermal conductivity than this building stone: 0.09 W / (m? K) vs. 0.8 W / (m? K). Therefore, it keeps the heat much better in the house. The natural structure of the tree normalizes the level of humidity in the house, so the air in such rooms is rarely dry even when using heaters. Therefore, the level of comfort in such a dwelling is much higher than in a house made of bricks.

Of building stones (brick, foam and gas block,Concrete block) the warmest is arbolit. This stone is made of a mixture of concrete and sawdust. The technology of production of arbolite allows the use as a filler of wood chips, small chips, dry needles.
Warm blocks of sawdust concrete can be manufacturedYourself. To do this, you need form-formwork and a small vibrating table. Before laying in the cement-sand mortar in the sawdust, it is necessary to add lime to the puff. This will prevent the decay of wood and the swelling of the arbolite. The house of sawdust is the warmest of those that are built with the help of building stones.

The buildings of sandwich panels are in many ways identicalCarpenters. They have the same type of insulation: foam or its more dense modification - polyurethane foam. This material is located inside the sandwich panels and in the walls of the carcass maker. Therefore, these two types of houses have the same thermal insulation characteristics. In the frame house construction, mineral wool can be used as a heater. But due to its high hygroscopicity, it quickly loses its heat-insulating properties: it dampens and settles. All buildings, built on either of these two technologies - frame and sandwich panels, keep the heat well. This fact proves that such buildings do not need regular heating in the cold season.

The house of what material is the most reliable?

One of the most durable buildings is brick. These buildings can survive without overhaul and reconstruction for more than 100 years. Wooden houses require constant care, since they tend to change their shape due to shrinkage of the tree and its drying or moistening. Therefore, the durability of wooden houses can be ensured only by quality lumber and regular care.
The frame house will serve without faultRepair for at least 50 years. These buildings are good because they do not need as much attention as houses from a beam or a log. Therefore, in terms of durability, the palm tree belongs to the houses made of reinforced concrete and brick.

The house of what material is the most reliable and warm Was last modified: July 4th, 2017 By Ryzsyipp
It is main inner container footer text