CeskyFrenchGermanItalianPortugueseTurkceSpanish

How to buy a car in Vladivostok
04/22/2016
How to clean a laptop
04/22/2016

How to hide the wires

How to hide the wires

In our apartments and offices are so many all sorts of equipment.

It is necessary to live and work.

But what to do with many wires? Not only that, they are able to spoil the impression from the very best design, also can be dangerous.

Wires will certainly need to hide.

This can be done in different ways.

instructions

1

There are special plastic boxes forpower and low-voltage wirings. They can be fastened to any finishing materials. Typically such ducts are of rectangular cross section, sometimes they are made convex. There are even self-adhesive boxes, they are very easy to attach to the surface, and the wire is placed inside. It is very convenient. Length of ducting - about 2 meters, but it can be made of them trough of desired length, coupled to each other and stretch the wire on such a chute - one or more. If you can not find self-adhesive trunking, conventional box can be attached to the wall with glue or screws.

How to hide the wires

2

If you do not want to use box, and it is necessarypave the wiring on the tiles, you can place it in the grooves between tiles. However, wire should be thin section - about 1.5 mm. Carefully and gently clean the grooves between tiles using grinders. Their depth should reach about 1 cm. Then, apply where the wire will go a little tile adhesive. Place the wire and mask it with grout for a tile.

How to hide the wires

3

If you need to hide wiresdrywall, it is necessary to build a thick aluminum wire rod serving broaching. When should stretch wire for drywall - a wall or ceiling. Then you can decorate the surface of any suitable materials. Wire them will not be visible. If the walls are not made of plasterboard and brick, will have to Stroebe wire special channels, and then zashpaklevyvat them and only then start finishing.

How to hide the wires

4

The cables from the TV or the phone can be removedunder the plinth. Lift the baseboard, put a wire or cable, and then again lower plinth. To the wires do not fall out when cleaning the room, skirting better fix. You can stick and can be planted on the screws in increments of 40 cm. Then the baseboard will adhere perfectly to the wall and securely hide the wires.

How to hide the wires

Comments are closed.