The need to hide pipes in the bathroom is causedThe fact that the type of communications does not improve the impression of the room at your guests. When cleaning pipes in boxes or under tiles, it is important to leave the possibility of access to the key elements: cranes, connections and valves. For this you can use the simple solutions described below
A good way of hiding the pipes is to install a gypsum board box.
Such a box can be built for any pipes -Vertical or horizontal. With the help of inserted plastic doors, you can easily access the valves. The plasterboard itself is attached to the wooden frame with nails. Horizontal pipes are closed with a simple insertion in the end of the bath. Thus, you hide the pipes and get an invisible cabinet under the bathroom, in which you can store all the necessary household items.
For vertical pipes a rectangularA pencil case in which it is also possible to store mops, sticks and other long things. Thanks to this space in the bathroom is not lost in the empty, but can be used with advantage. Outside, such cabinets can be painted, pasted with a film or lined with plastic or wood.
Hiding pipes for tile
In order to remove the pipes under the tileTile, you need to build a partition of the chipboard, which will be tiled. First, we measure the distance where the partition will be installed, and saw off a sheet of chipboard of the required size. To both walls in the place where we will install the sheet, nail one wooden bar with a thickness of at least 5 cm. We apply a sheet of chipboard to these blocks. On the nailed sheet, it is necessary to find the middle in height and at this level to punch a small door on one side. Through this opening, access will be made to the pipes for conducting service operations.
When this operation is completed, cover the sheetA cement layer with a width of about 5 mm. Frozen, this cement will serve as an excellent base for tiles. Each tile is smeared with special glue and pressed against its place.
We remove the pipes into the wall.
There is an option of hidden placement of pipes in the wall of the room, and not near them. This option is only suitable if you completely change the pipe system, since the existing pipes are difficult to move.
In order to remove pipes in the wall, you needHollow out the walls of the strobes of the desired diameter. In these stitches, pipe holders or hinges are mounted to secure the pipes on the clamps. Pipes are placed in stitches and covered with cement mortar. The mortar is leveled under the general plane of the wall and covered with any material - wallpaper or tile. As a result, you have a full wall, without any hints about the presence of pipes.
Other variants of disguise.
In addition to these popular ways of draping pipes,There are other less common options to hide pipes in the bathroom. Often, the owners of small bathrooms past the pipes with a texture film, so that the pipes merge with the walls in color and are not so conspicuous. In this case, the space of the room is not wasted on the construction of the partition.
It is possible to create a cover for pipes made of plasticSiding. In this case, the technology is similar to the technology of working with plasterboard. Siding is fixed on a wooden frame with the help of nails or self-tapping screws.
Many apartment owners buy the usual highA case-pencil case, remove the back wall from it, make cutouts in the upper and lower panels. So get a fully functional closet, in which, in addition to things, pipes are hidden.
To mask the pipes in the bathroom, you canUse any of the options mentioned above. Or you can come up with a special way to hide pipes from strangers. After all, any repair is a creative process. The main thing is not to forget that access to the valves and water supply taps must be free. In the rest you are free to show your imagination.