Repair the broken hard disk sector, you can use a virtual disk with the operating system or the Windows installation disc.
Solve the problem and special programs may, for example, MHDD.
One of the biggest problems for thePC owners may be bad sectors on the hard disk. So give the sector known as "broken", but about the hard disk with these injuries is said that he began to "crumble".
; From such location directly damageIt depends on the ability to turn on / off the computer. If you went down the sector, where the operating system files, the PC will not turn on. When it comes to sectors where there are other files, the user will be able to boot the machine. Depending on this particular and chosen way of eliminating broken hard disk sectors.
What to do
; You must open This type of damage"My Computer" and select the right-click the drive. Then from the options choose "Properties", then "Tools" and "Check Now." Tick box should be marked "Automatically fix file system errors" and "Scan for and attempt recovery of bad sectors." Clicking the "Start", the user runs the hard disk for damage. After that, it is prescribed to restart the PC.
; In the second case, the disk must be on hand tovirtual operating system or the Windows installation disk. To start your computer, you need to insert the disc into the drive and turn on the machine as usual. All subsequent actions are similar to those described in the preceding paragraph. When working with the installation disc menu appears allowing you to select the command "System Restore." As a result, the hard disk will be checked for broken sectors and found damage eliminated.
And you can check and repair the hard disk andusing the program running through the Recovery Console. The very Recovery Console can be run without a boot disk. To do this, press F8 and select Safe Mode button, supports command line. After the console will be loaded with the selected section mounted thereon Windows. Care should be taken to match the disk partition, then an administrator password. After a row prompted, disc name is entered, the route and file name. Press "Enter" user runs the recovery process.
; Thus, checking the "C" section of the harddisk, you must run the Windows Recovery Console and define the command chkdsk c: / f / r. Prevent such trouble just continue - it needs to acquire special programs, for example, MHDD. Such a program will check the hard disk for errors, correct them, and "report back" to the user.