Plastic pipes made of polymers and polypropylene took a worthy place in our life.
The merits of plastic pipes include their low cost and mobility, as well as durability and the absence of corrosion.
The drawbacks include the mandatory availability of special welding equipment during installation.
Plastic Pipes Widely used in sewage systems,When transporting all kinds of aggressive media, gutters and water and gas pipelines under pressure. The very process of welding plastic pipes is to heat the welded parts to a temperature of 260 degrees Celsius. In the process of heating, the plastic parts heated to the optimum temperature are welded, without losing their original shape.
Installation of a system of plastic pipes - is, beforeIn all, the correct marking of the future highway. The length of blanks, as a rule, is sufficient for any distances in our apartments, although the possibility of welding plastic pipes "in line" is also developed. Usually Pipes Are welded in places of turn on 90 degrees special angular fitingami.
Monitoring of temperature and welding time inWelding machines are automated. Some useful tips: the parts to be welded should fit together tightly, without looseness. If there is any play, the parts are discarded. Remember that the plastic expands when heated. This is taken into account in the design of the parts to be welded, but it should still be remembered.
Before welding, it is necessary to remove the oxidized layer with a special scraper or special means, and then degrease the place of welding with alcohol or tantite.