Connecting phones, especially not the most difficult models, to the computer significantly expands the capabilities of mobile phones.
There are three main ways to connect: wired, using a DATA cable, and wireless? Via Bluetooth or IrDA.
You will need
- A CD with software, a cable (sold with the phone), a Bluetooth adapter
Usually, to connect the phone to the computer, you need a software disc (sold with the cable). If it is available, the connection is as follows:
One side of the cable connect to the computer (to the USB port), the second? To the phone (usually? Mini- or microUSB-port).
Most often the computer recognizes the connected phone automatically. If you did not recognize it? You need to install the software from the disk.
Some phone models are recognized by a computer as an ordinary flash card. In this case, no additional software is required.
After you recognize your phone as a computer, you can work with files.
Connecting the phone through the infrared port(IrDA) or Bluetooth is almost the same. The difference in the range of the communication. The infrared ports of the phone and the computer should? See? Each other, Bluetooth is quietly operating at a distance of several tens of meters. Because of its "long range"? And the convenience of Bluetooth is distributed much more IrDA. To connect your phone to your computer via Bluetooth, you need, first of all, a Bluetooth adapter for your computer. Along with it, the necessary software is sold.
We will assume that the Bluetooth adapter and the necessary program on the computer are already installed.
Turn on the phone Bluetooth-on the computer should automatically turn on the Bluetooth-adapter.
Choosing in the computer software? Adding a new Bluetooth-device ?. The Connection Wizard starts.
If everything is ok, the Bluetooth connection wizard will detect the phone.
Then the question arises about the need for a key to add a device. Do you want to select an access key automatically ?. A window will appear asking you to enter the key.
At the same time, you will be asked to enter the same access key in the connected phone. We enter it.
This connects the mobile phone to the computer via Bluetooth is completed - you can work with files.