CeskyFrenchGermanItalianPortugueseTurkceSpanish

Clutch Red
04/30/2016
MAKEUP Madonna
04/30/2016

How to connect the library to the compass

How to connect the library to the compass

The library is a software module that is designed to extend the standard KOMPAS-3D software features.

Each library is focused on the performance of a specific task-aided design, which forms the design documentation.

You will need

  • - a computer-
  • - Compass program installed.

instructions

1

Connect the library to the compass in two ways. The first case is used when the screen is not caused by the library management system. Start the Compass, go to the main menu, select "Tools" menu, select "Library Manager."

2

In the left pane, click the paragraph,corresponds to the library that you want to connect. In the right pane to connect the library to the "Compass", open the context menu on it, then click "Universal Mechanism", then "Connect". Wait for the red flag, it means the connection library completed successfully.

3

Use a second method of attachment library to "Compass" program. To do this, select "Tools" in the main menu, then "Library Manager." Go to the left side of the window management system, click plug libraryFor example, "Engineering".

4

In the right pane, double-click on the library and wait for it to connect, due to open its contents. If it opened, and the screen displays the composition of this library, Then the connection is completed.

5

Connect "fotorealistiki" library in the "Compass". This library is suitable for use in advertising, with the visualization of products. It provides a considerable choice of realistic materials and textures, as it is possible to add custom elements of shade, light, background, and environment scenes. To install it, run photoreal.msi archive, then follow the installation wizard.

6

Then connect the library with the help of the manager in the program "Compass". Please add a description of the libraryAnd then navigate to the type selection window and selectphotoreal.rtw file. Way to connect the library to the program - C: / Program Files /, below the folder with the program, the default folder is ASCON, then KOMPAS-3D V10, and it is Libs folder.

Comments are closed.