CeskyFrenchGermanItalianPortugueseTurkceSpanish

How to draw a fairy bird
08/29/2016
WHY laptop hot and noisy
08/29/2016

How to configure a computer as a server

How to set up your computer as a server

To make your home server computer, you must install and configure specialized software.

it is desirable to make the installation of a special operating system and adjust the appropriate settings for the best performance.

instructions

1

It is best suited for the serveroperating system of Unix family. They are considered the most secure and can be installed without the use of a graphical environment that will minimize computer resource consumption and more to give to the server operation and data processing.

2

Record the image of the Linux operating system andmake its installation. You can choose almost any distribution of the OS. For web server is best suited Debian, but beginners will be the easiest to work with Ubuntu. Writing the boot image can be made using UltraISO program. Download the appropriate disk image from the official website of the selected distribution.

3

Boot from the disk and set recordedcomputer system. To do this, go into the BIOS and select the section First Boot Device name of your drive. Insert the disc into the drive and start the computer. Most modern Linux distributions are supplied with a graphical installer that simplifies the installation procedure. Follow the instructions on the screen.

4

After installation you will see the console, throughand that will be the server management. If you installed Linux with a graphical interface to launch the command line, use the program "Terminal" in the application menu.

5

To start the server, you must install Apache software package, PHP and MySQL. To do this, enter the command sudo apt-get install tasksel.

6

After the package installation procedure willcompleted, type sudo tasksel install lamp-server. With it, you install the Apache web server in conjunction with PHP and MySQL to run the desired site. The setup program may ask you to set a password for access to the database server. Enter the requested password and click Ok.

7

Run the installed server using sudo /etc/init.d/apache2 start command. The server can be regarded as established.

Comments are closed.