How to get rid of dampness in the house
HOW paid child support for two children

How to check the alloy b / U disk

Stand for checking and straightening alloy wheels

To check the b / u need to have alloy wheelsbalancing machine for disk, which is available for tire. One of the most common defects of cast / used CDs is a violation of the disk geometry, purchase their egg-shaped.

At home and means at hand to check alloy wheels for defects and geometry is not possible.

You will need

  • Cast b / y drives.



To check b / y alloy wheels drove them to the nearest tire. Ask employees to remove tire rubber with CDs, if available to them.


Explain tire store employees, you need to check the geometry of the drive. Workers check your tire cast wheels on a conventional balancing machine and tell you about the defects on the disc.


If the disk or disk geometry is broken, then youprompt, where it is possible to correct this defect. This operation is performed on a special machine by hot or cold rolling. Such machines are not available at every tire service, so it is better to know in advance the nearest shop where you can immediately fix wheelsIn case of detection of small defects in metalor violation of the geometry, so as not to waste time on a couple of trips to different points. Correction violations disk geometry is from 600 rubles for a single disc.

Comments are closed.