CeskyFrenchGermanItalianPortugueseTurkceSpanish

How to reconcile Tax
07/24/2016
How to behave when meeting with a shark
07/24/2016

As a self-install the door in the apartment?

door installation

Installing the door with his own hands - quite a simple process, but he, like all the other demands attention and basic skills.

Before installing the door immediately, it should beget rid of the old one. To do this, remove it from its hinges. In case the door keeps on gasketed fixtures, door arm should be raised, with the door to be opened at a right angle. If the loop can not be disassembling, simply unscrew them.

The next step will be the dismantling of the door frame. If the box is made of wood, it is necessary to saw her in half of the side previously get rid of extra accessories. In the case of the metal box may require Bulgarian. Once you get rid of the box, repel unwanted plaster with a hammer.

Now you can move to the door. There are several installation options, it all depends on the level of the doorway.

The first option is to use as afixing the mounting plates. The principle is quite simple: a plate superimposed on the edge of the doorway from the inside. After that the openings mounting plates hammered steel rods. Subsequently, these rods should be welded. This method makes it possible to attach a door frame to the wall.

The second method. The door frame is fixed to the wall by means of anchor bolts. If there is no bolt holes, make them yourself. Later, with the help of special plugs can be eye-catching cover bolts.

Here is the list of auxiliary materials, which will help you in your job rod for mounting. Length of about 10 to 15 centimeters, and a thickness of 15 millimeters.

Wedges. With their help fix the door frame. For that fasten them to the side walls. Also, be aware of a few things if you are going to set your own door.

To check how exactly was installed the door is enough to measure the uprights on both sides with the help of a plumb line.

During installation, you will certainlygaps, they are treated with foam. Pre-clearance can be treated with water in order to scrapie materials more efficiently. Apply the foam to be a special gun, this will allow more accurate dosing of the material.

Have professionals install a door it takes abouthour, and even if you do not take one of them, then you have to install it will take not much more time. If you come to install the door with all the responsibility, then there is nothing complicated about it.

Comments are closed.